0 comments

BSEE declares deepwater well containment exercise a success

by on July 31, 2012 12:00 am GMT
 

BSEE declares deepwater well containment exercise a success

WASHINGTON — The Bureau of Safety and Environmental Enforcement (BSEE) announced the successful completion of the first-ever, full-scale deployment of critical well control equipment to exercise the oil and gas industry’s response to a potential subsea blowout in the deepwater of the Gulf of Mexico. BSEE Director James A. Watson confirmed that the capping stack system passed a pressurization test according to the requirements in the scenario, marking the end of the exercise.

The unannounced deployment drill, which was undertaken at the direction of BSEE, began July 24 to test Marine Well Containment Company’s (MWCC) capping stack system, a 30-ft-tall, 100-ton piece of equipment similar to the one that stopped the flow of oil from the Macondo well following the Deepwater Horizon tragedy in 2010. During this exercise, the capping stack was deployed from its storage location near Houston, Texas, to an area in the Gulf of Mexico nearly 200 miles from shore. Once on site, the system was lowered to a simulated well head (a pre-set parking pile) on the ocean floor in nearly 7,000 ft of water, connected to the well head, and then pressurized to 10,000 psi.

BSEE engineers, inspectors and oil spill response specialists are evaluating the deployment operations and identifying lessons learned as the bureau continues efforts to improve safety and environmental protection across the offshore oil and gas industry.

Critical lessons like securing mud mats for the subsea accumulator skid (SSAS) are being noted by BSEE and MWCC as teams work toward concluding the exercise deployment. The SSAS provides hydraulic fluid needed to close the ram and associated valves on the capping stack. A successful workaround was used in the exercise and, so far, no critical failures or problems have been noted in the demonstration.

07/31/2012